Stellar Drive Monitor
Stellar Drive Monitor
Das Festplatte Scannen von Stellar Drive Monitor durchsucht die Festplatte nach fehlerhaften Sektoren. Dieser Prozess meldet alle fehlerhaften Sektoren auf dem Laufwerk, die während des Scans identifiziert werden.
Hinweis: Wenn mehrere Festplatten an Ihren Computer angeschlossen sind, können Sie das gewünschte Laufwerk aus der Dropdown-Liste oben rechts auf der Benutzeroberfläche auswählen.
Führen Sie Stellar Drive Monitor aus.
Wählen Sie das Laufwerk, das Sie scannen möchten, aus der Dropdown-Liste oben rechts auf der Benutzeroberfläche.
Wählen Sie im linken Bereich der Benutzeroberfläche die Option Festplatte scannen.
Es werden drei Optionen zum Scannen Ihres Laufwerks angezeigt, nämlich Festplatte scannen, Kurzer Selbsttest und Erweiterter Selbsttest. Wählen Sie Festplatte scannen, um die fehlerhaften Sektoren auf Ihrer Festplatte zu überprüfen.
Klicken Sie auf Scan. Der Scanvorgang beginnt. Sie können den Vorgang in der Tabelle Festplatte scannen verfolgen.
Hinweis: Verarbeitete Blöcke, die in Ordnung sind, werden in blau angezeigt, während schlechte Blöcke rot gefärbt sind.
Hinweis: Die insgesamt verstrichene Zeit und die restliche Zeit bis zum Abschluss des Scanvorgangs werden ebenfalls im rechten Fensterbereich angezeigt.
Hinweis: Sie können auf die Schaltfläche Stoppen klicken, um die Überprüfung abzubrechen. Wenn Sie einen Scan anhalten, bedeutet dies jedoch, dass ein neuer Scan von Anfang an gestartet wird und nicht von dem Block, an dem er angehalten wurde.
Hinweis: Es ist sehr ratsam, einen Klon von einem Laufwerk mit fehlerhaften Sektoren zu erstellen. Ein Laufwerk mit fehlerhaften Sektoren hat eine hohe Ausfallwahrscheinlichkeit.
Sobald der Scan erfolgreich abgeschlossen wurde, wird die Meldung "Scan abgeschlossen" angezeigt. Klicken Sie auf OK, um den Vorgang abzuschließen.
Hinweis: Sie können den Scanvorgang mehrmals vom selben Bildschirm aus erneut starten, indem Sie auf die Schaltfläche Scan klicken.
Navigieren Sie zu den drei Optionen zum Scannen, indem Sie auf die Schaltfläche Zurück klicken.
Auf dem Bildschirm erscheint ein Dialogfeld "Datenträger scannen" mit der Meldung "Scanergebnisse gehen verloren, wenn Sie diese Anzeige verlassen". Klicken Sie auf Ja, um fortzufahren.
Hinweis: Wenn Sie auf Ja klicken, gehen alle Scaninformationen über das Laufwerk verloren.