Recover Lost Data from Formatted RAID Array?

Summary: In this blog, you will learn steps to recover data from formatted RAID arrays such as RAID 0, RAID 5, and RAID 6, in a Windows PC. As there’s no manual method to recover formatted data from RAID, we will use a specialized RAID data recovery software, such as Stellar Data Recovery Technician, to get back data from formatted RAID volume(s).

Usually when you format a volume in Windows, whether a drive volume or a RAID volume, it’s ‘Quick’ formatted by default. Therefore, only the file system is replaced and data remains on the volume unless you fully format the volume by unselecting the ‘Quick Format’ option in the disk formatting window. 

When a volume is formatted, data is permanently lost. And if it happens with a RAID volume or partition, the problem becomes more complex.  In such a case, you can’t use just any data recovery software. You must use a reliable and specialized RAID data recovery software that can rebuild a virtual RAID array for data recovery.

Steps to Recover Data from Formatted RAID Array

Accidental formatting is common and may happen while managing the RAID partitions. However, you can recover data from a formatted RAID volume, if it’s online and recognized by the system. For this, you will need a data recovery software, such as Stellar Data Recovery.

But if the RAID array went offline, after formatting the RAID volume, you must use Stellar Data Recovery Technician software to reconstruct the RAID array and get back your lost data. This RAID data recovery software can help you recover data from a formatted RAID 0, RAID 5, and RAID 6 volume or partition.

It is a powerful RAID data recovery software that rebuilds a virtual RAID array automatically and lets you save the recovered data to an internal or external disk. Though you need to know the RAID parameters for RAID reconstruction, this advanced software automatically detects the RAID parameters and constructs probable RAID volumes for data recovery.

What’s more, is that you can also find and recover data from lost RAID partitions. Similarly, there are tons of other great features that this software offers to facilitate safe data recovery from formatted, inaccessible, or broken RAID arrays.

The steps to recover data from formatted RAID array are as follows.

Step 1: Connect RAID Drives to Windows PC

First, disconnect the RAID drives from RAID array and connect each RAID drive to your Windows PC as an individual (separate) drive. You can use SATA/IDE connectors on your PC motherboard. You may also use SATA/IDE to USB converter cables or enclosures if you own a laptop or PC with limited SATA/IDE ports. You will also need a USB hub to connect all RAID drives.

Step 2: Inspect RAID Drive’s Health and SMART Status

Stellar Data Recovery Technician comes with a SMART disk monitoring and cloning utility called Drive Monitor. You can access it by installing Stellar Data Recovery Technician software on your PC and then go to More Tools > Monitor Drive.

This utility helps you check the health and critical SMART disk parameters. This step is important as a failing RAID disk or underlying SMART disk error can lead to permeant data loss if the drive stops working during the data recovery process.

Step 3: Construct Virtual RAID Array for Recovery

However, if you don’t know, select Don’t know option from the respective drop-downs. The software intelligently rebuilds a few probable RAID constructions which you can choose to run a scan and get back lost data.

After RAID construction is finished, the software displays constructed RAID volume (or volumes) in the ‘Select Constructed RAID’ window. Click on ‘Show Volume List’ button

Step 4: Scan and Recover Formatted Data from RAID

Deep Scan is an advanced scan method that thoroughly scans and locates lost files from formatted drive based on file-signatures and facilitates RAW data recovery by digging deep into the RAID drives. Therefore, it takes much more time than the ‘Quick Scan’ but gets back maximum recoverable data from the RAID volume.

NOTE: You will need to activate the software to save the recovered files from the reconstructed virtual RAID array.

So that’s how you recover data from a formatted RAID array, such as RAID 0, RAID 5, or RAID 6, safely.

Conclusion

Data recovery from formatted RAID array volume is a complex task and thus, requires a specialized tool to scan and recover data. In case you accidentally formatted a RAID volume or partition, use Stellar Data Recovery Technician software to avoid any further damage to your data.

No hit and trial method but only a RAID data recovery software can help you in such a grave data loss situation. This software is free to download and supports RAID 0, RAID 5, and RAID 6 arrays. Also, it’s powered by advanced RAID recovery algorithms that rebuild a virtual RAID array and helps recover data from a formatted, corrupt, broken or inaccessible RAID array.

For more help on RAID data recovery, leave a comment or get in touch with our data recovery experts via the Self Help & Support page.

Related Post

Exit mobile version