How to Stop Automatic Restart Windows 10 Issue

Summary: Automatic restart Windows 10 issue comes due to various reasons such as corrupted devices drives, hardware issue, incorrect system settings, system failure, etc. Go through this blog to learn how you can fix this issue on your own without paying big consultant fee to tech professional.

Windows OS may restart unexpectedly anytime while you are working on an important project, a document, or a spreadsheet. It doesn’t matter which app you are using; Windows may restart at any point without prior warning. This may happen due to several reasons discussed in this post.

However, due to an automatic system restart, apps get abruptly closed which might result in data loss. And you may lose your file or edits that might have taken hours or days to create.

Also, sometimes a Windows system may enter an infinite boot loop.

Why Does Windows Restart Automatically?

Windows may restart automatically due to the following reasons:

  1. Damaged system files
  2. Corrupt Windows updates
  3. Incorrect system settings
  4. Hardware issue
  5. Drive problems
  6. Malware infection
  7. Corrupt device drivers
  8. System failure

Problems with hardware, drive, or device drivers can also cause the system to crash. Usually, when the system crashes, you see the Blue-Screen-Of-Death. The BSOD can have severe implications on the drive and the system. In a worst-case scenario, BSOD may cause drive corruption and permanent data loss.

Therefore, it’s crucial to urgently fix the Windows 10 automatic restart issue. However, to fix the issue, you need to explore and perform repair or alterations in all possibly affected areas in the system.

Important Note: In case data is lost during auto-system reboot, you must immediately perform data recovery. It’s crucial, as continuous use of the system may overwrite the deleted data making successful recovery almost impossible. Therefore, if you don’t want to complicate the recovery process and lose the data permanently, use a software such as Stellar Data Recovery to restore the data first and then proceed to the fixes.

Steps to Stop the Automatic Restart Windows 10 Issue

1. Disable Auto Restart

To disable auto restart from advanced system settings, follow these steps:

2. Run Malware Scan

To check out the possibility of a malware causing the automatic system restarts, run a deep malware scan. Use some reliable anti-malware scanner app. You can use the inbuilt Windows Defender malware scanner for the purpose.

If nothing is found, proceed to the other fixes.

3. Repair System File

Damaged Windows system files can cause severe issues in your PC such as auto-reboot. Besides auto-rebooting for installing updates and due to system failure, Windows OS may also crash or abruptly shut down due to damaged or corrupt system files.

To check system file integrity, you can run the SFC scan. The scan searches for the system files and inspects them for any corruption or damage. A corrupt or damaged system file is replaced with a new file if found.

To run the SFC scan, follow these steps:

NOTE: During the SFC scan, keep the Windows Repair Disc or Installation disc handy for replacing the damaged file if not found in the cache.

If the problem persists, continue to follow other solutions, as mentioned below.

4. Uninstall Recent Program or System Changes

If you had recently installed a software or driver update after which the issue started, consider uninstalling them immediately. Maybe the update you installed is corrupt, damaged or infected. You may use the system restore feature in Windows to restore your system. Always install software and drivers from a trusted source to avoid such issues.

5. Run Disk Scan

To check whether your hard drive is working fine, use Windows built-in error-checking tool as follows:

This may fix most errors with the drive or may reveal some problem with the drive. Take appropriate measure, based on the outcome. To get deeper insights, use a tool such as ‘Drive Monitor’.

6. Manually Install Windows Updates

Sometimes updates may cause serious troubles instead of solving the existing ones. Due to damaged or incomplete updates, Windows update may fail triggering a system reboot loop at every unsuccessful attempt.

To stop automatic restart Windows 10 issue, you must uninstall problematic updates and install the updates manually by following these steps:

Step 1: Uninstalling Updates:

Step 2: Installing Updates Manually

Did Not Fix?

Then re-install Windows!

But before that, use a data recovery software to recover your data that may have got deleted or lost due to automatic system restart. It’s crucial to perform data recovery before re-installing Windows, as re-installation may overwrite the deleted and lost data beyond recovery.

You can use a software such as Stellar Data Recovery. It can help you get back your lost, deleted, or formatted data in most common data loss situation from a Windows PC.

After installing the software, all you need to do is

The software also recovers data from a severely corrupt and formatted storage media with NTFS, FAT (FAT16/FAT32), or exFAT file system.

Conclusion

It’s normal for Windows to auto-restart to install Windows updates and you can always disable the auto-reboot from the system settings. However, sometimes disabling auto-restart setting may not work as the problem may also arise due to issues with the system files, devices drivers, or system hardware.

To help you fix and stop automatic restart Windows 10 issue, we have discussed a few solutions. The fixes can help you fix the auto-restart issue in Windows and safeguard against data loss due to sudden system shutdowns. Further, we mentioned how to restore data in case you lose it due to abrupt or auto system restart in Windows PC or laptop.

FAQ

1. Can RAM cause auto restart?

Your system may restart for many reasons, including RAM, malware infection, etc. It may cause your system even to crash completely.

2. What are the signs of RAM failure?

There could be some common symptoms that you need to identify when RAM fails. Some of the common symptoms are as follows:

3. What are the signs if your PC is infected with Virus?

You need to keep a keen eye on your system and notice any of the following symptoms that indicate malware or Virus may have infected your system.

Related Post

Stellar Data Recovery

Trial Download is for Desktop or Laptop. Put your email id to receive the download link




Exit mobile version